Description
The medical gas outlet shall be an Amico Alert-1 series.
Outlet back bodies shall be manufactured with a DISS gas specific fitting which accepts only DISS specific adapters. Body shall be 1-5/16″ [33 mm] diameter one piece brass construction. For positive pressure gas services, the outlet shall be equipped with a primary and secondary check valve and the secondary check valve shall be rated at a maximum of 200 psi [1,379 kPa] in the event the primary check valve is removed for maintenance. Outlet bodies shall be gas specific by indexing each gas service to a gas specific dual pin indexing arrangement on the respective identification module.
A large color coded front plate shall be used for ease of gas identification and aesthetic appeal.
The latch-valve assembly shall be Ohmeda DiamondTM Quick Disconnect, Chemetron Quick Disconnect, Puritan-Bennett Quick Disconnect, or DISS depending on the type ordered.
All M.R.I. outlets are manufactured from nonferrous material.
All outlets shall be cleaned and degreased for medical gas service, factory assembled and tested.
The outlets are UL Listed and ETL Listed.
Amico products comply with NFPA 99 and CSA Z7396.1.
Reviews
There are no reviews yet.